Hose Elbow Fitting
Is there a better way to attach a tin elbow/hose to a dryer outlet than a metal/plastic clamp or duct tape?
The dryer outlet is only ~1/2" long and inadequate to get a snug fit between a 4" tin elbow/hose when using a clamp. The clamp isn't designed to tighten at any angle in relation to the pipe, and any extension easily falls off. Duct tape doesn't work either as this gets damp and loses its sticking properties. I've tried a plastic extension in the past, but found the adhesive ring to have the same problem, because the extension can only "hang on" with the 1/2" available on the dryer outlet. I'd rather not resort to superglue... please help.
don't know
 |
 90 Elbow Fitting Braided Hose Macroline Paintball Gre $4.99 Time Remaining: 1d 18h 50m Buy It Now for only: $4.99 |
 90 Elbow Fitting Braided Hose Macroline Paintball Clr $4.99 Time Remaining: 1d 18h 50m Buy It Now for only: $4.99 |
 90 Elbow Fitting Braided Hose Macroline Paintball Blu $4.99 Time Remaining: 1d 18h 50m Buy It Now for only: $4.99 |
 90 Elbow Fitting Braided Hose Macroline Paintball Blk $4.99 Time Remaining: 1d 18h 50m Buy It Now for only: $4.99 |
 90 Elbow Fitting Braided Hose Macroline Paintball Raw $4.99 Time Remaining: 1d 18h 50m Buy It Now for only: $4.99 |
 90 Elbow Fitting Braided Hose Air Line Kit Paintball $7.99 Time Remaining: 3d 18h 42m Buy It Now for only: $7.99 |
 45 Elbow Fitting Braided Hose Air Line Kit Paintball $7.99 Time Remaining: 3d 18h 56m Buy It Now for only: $7.99 |
 2 Macroline CO2 HPA Gas Air 1 8 NPT Straight Hose Fittings Elbows Male Male $5.50 Time Remaining: 15d 2h 13m Buy It Now for only: $5.50 |
 2 90 Degree Microline Press on 1 8 NPT CO2 Gas Air Hose Elbows 5 32 Fittings $3.00 Time Remaining: 17d 15h 57m Buy It Now for only: $3.00 |
For comparison shopping
we also bring you the results below from amazon.com
| Your request contained a restricted parameter combination. When SearchIndex equals Blended, BrowseNode cannot be present. |
